Renthal Fatbar 35 Carbon Handlebars

With all our new 35mm handlebar line, we saw the flex characteristics being of optimum importance. For all our 35mm handlebars we have matched their flex characteristics to the 31.8mm equivalent.

All 35mm bars have the same ride quality that Renthal handlebars have become synonymous with.

We have achieved the same ride quality with no loss of strength or durability at a very similar weight. The only exception to this is the Fatbar, where we’ve reduced the weight significantly, whilst maintaining the same level the strength, durability as the smaller diameter handlebar.

Importantly, we have increased the width of all handlebars by 20mm, taking the Fatbar Carbon 35 to 800mm.

The Renthal FatBar Carbon 35 is the ultimate DH race handlebar.

This is achieved at a full 800mm width and at a market leading 225g weight.

This handlebar comes in at 800mm and is approved for downhill racing and use with a twin crown fork.

Features

• UD carbon construction
• Ride tuned for the ultimate combination of stiffness and shock absorption
• Increased width oversize centre section for fine-tuned flex characteristics
• DH race and twin crown fork compatible
• DH spec 800mm width
• Permanent graphics, set-up grid and cut marks
• Race-light 225g weight

The recommended maximum torque on the Fatbar Carbon 35 is 5Nm for all components mounted to it (including stems)

Specifications

• Width: 800mm
• Rise: 10, 20, 30 or 40mm
• Backsweep: 7 deg
• Upsweep: 5 deg
• Handlebar Clamp Diameter: 35mm